Installation Procedures For Siglite Glass Road Studs - Seih-Ying Co., Ltd.- The glass road stud supplier

Home> Products>Installation Procedures For Siglite Glass Road Studs

Installation Procedures For Siglite Glass Road Studs

To inquire or purchase, select products on and clickSelect All Unselect All

<font size=4><font color=yellow>Road marking reflector</font><br />Installation Procedures for Siglite Road Marking Reflector

Road marking reflector
Installation Procedures for Siglite Road Marking Reflector ((glass road stud, 360 degree Cat Eyes))

1. Road safety Devices. 2. Use drill stop on the drilling bit to drill hole(Diameter:100mm, Depth:25mm) 3. Use hammer and chisel to remove the asphalt or concrete debris in the hole. 4. Use high pressure air blower to...

<font size=4><font color=yellow>Solar road stud</font><br />Installation Procedures For Solar Siglite(A-68)

Solar road stud
Installation Procedures For Solar Siglite(A-68) (solar warning light, solar road marker)

1. Drill a hole of 42mm depth in the pavement with the 112mm drilling bit.(Use the drill stopper to assure the correct depth of the hole). 2. Use special socket tool to remove the excessive gravels of asphalt from the h...

<font size=4><font color=yellow>Solar warning light</font><br />Installation Procedures For Solar Siglite(A-666)

Solar warning light
Installation Procedures For Solar Siglite(A-666) (road stud, 360 degree solar road marker)

1. Drill a hole of 30mm depth in the pavement with the 4”drilling bit.(Use the drill stopper to assure the correct depth of the hole). 2. Use special socket tool to remove the excessive gravels of asphalt from the...

<font size=4><font color=yellow>All-position tempered glass road reflector</font><br />Installation Procedures for All-position Tempered Glass Warning Reflector(SIG-D50)

All-position tempered glass road reflector
Installation Procedures for All-position Tempered Glass Warning Reflector(SIG-D50) (road marking, road reflector)

1. Made adequate facility of safety warning. 2. Mark on the position to be worked. 3. Drill a hole at diameter of 52mm and depth of 42 mm with drilling machine (mark on the drilling machine or put a ring at the drillin...

To inquire or purchase, select products on and click Select All Unselect All